Loctite 496

Loctite 496 adhesive provides the following product characteristics Technology Cyanoacrylate Chemical Type Methyl Cyanoacrylate Appearance (uncured) Transparent, colorless liquid LMS Components One part – requires no mixing
Viscosity Low, Cure Humidity, Application Bonding
Key Substrates Metals, Rubbers and Plastics
Loctite is a general-purpose adhesive and is
particularly suited to bonding of metal substrates.
Commercial Item Description A-A-3097:
LOCTITE 496 has been qualified to Commercial Item
Description A-A-3097. Note: This is a regional approval.
Please contact your local Technical Service Center for more
information and clarification.
TYPICAL PROPERTIES OF UNCURED MATERIAL
Specific Gravity @ 25 °C 1.1
Flash Point – See SDS
Viscosity, Cone & Plate, mPa·s (cP):
Temperature: 25 °C, Shear Rate: 3,000 s
-1 70 to 120LMS
Viscosity, Brookfield – LVF, 25 °C, mPa·s (cP):
Spindle 1, speed 30 rpm 100 to 120
TYPICAL CURING PERFORMANCE OF Loctite 496 adhesive
Under normal conditions, the atmospheric moisture initiates the
curing process. Although full functional strength is developed
in a relatively short time, curing continues for at least 24 hours
before full chemical/solvent resistance is developed.
Cure Speed vs. Substrate
The rate of cure will depend on the substrate used. The table
below shows the fixture time achieved on different materials at
22 °C / 50 % relative humidity.

• explore this URL for more info https://www.loctiteproducts.com/en.html
• Buy now https://bestpartssales.com/product/loctite-496-adhesive/