ComAp InteliLite4 AMF 25 — Single Gen-Set AMF Controller
Of every ComAp model we get asked about, this is the one: the InteliLite4 AMF 25 is the current generation of what ComAp itself calls “one of the world’s most successful controllers in its class,” and it’s the direct replacement path for two older, now-discontinued panels — the original InteliLite AMF 25 and the InteliLite NT AMF25. If your existing panel reads “AMF 25” or “IL-NT AMF25” in any form, this is very likely your part.
Not sure if your panel matches, or need the low-temperature variant? Send us the order code printed on the label, or a photo of the unit, and we’ll confirm before you order.
ComAp InteliLite4 AMF 25
IL4AMF25BAAAdvanced single gen-set controller for standby and prime-power applications, combining full engine and mains monitoring with cloud-based remote fleet management — built to run as easily from a technician’s laptop on site as from an office anywhere in the world.
- Standby and prime-power application control from one unit
- 8 binary outputs, 8+1 binary inputs, and 4 analogue inputs (U/I/R) with +5V reference
- 2 high-current E-Stop binary outputs and an inbuilt RS485 port
- USB Host with Power-over-USB for configuration, plus 2 slots for plug-in extension modules (Modbus, Internet, SMS, I/O)
- ECU support for Tier 4 Final and Stage V emissions-compliant engines
- Dual Mutual Standby application support, load shedding, and dummy load management
- Real-time clock with battery back-up and a detailed history log holding up to 350 records
- User Access Management and cyber-security hardening built into the controller firmware
| Order Code (standard) | IL4AMF25BAA |
|---|---|
| Order Code (low-temp) | IL4AMF25BLA |
| Brand | ComAp |
| Series | InteliLite4 |
| Application | Single gen-set, standby & prime power, AMF |
| Display | Backlit graphic display with icon symbols |
| Configuration Tool | InteliConfig (PC), WebSupervisor (cloud) |
| Depth (with plug-in module) | 41–56 mm, varies by module fitted |
| Panel Cut-Out | confirm current drawing with supplier before panel fabrication |
Typical Applications
- Standby and prime-power diesel or gas gensets from small commercial sites up to industrial installations
- Fleet operators and rental companies wanting one controller model across mixed-site deployments, monitored centrally via WebSupervisor
- Remote or unmanned sites needing SMS/email alerting and geofenced GPS protection against theft or unauthorised movement
- Modern EFI/electronic engines requiring Tier 4 Final or Stage V-compliant ECU communication
- Dual Mutual Standby installations where either of two gensets can automatically back up the same load
- Retrofit replacement for legacy AMF 25 and IL-NT AMF25 panels that are now discontinued and unsupported
Which ComAp AMF 25 panel do I actually have?
| Label on panel | Order code | Status |
|---|---|---|
| InteliLite AMF 25 | IL3AMF25BAA / IL3AMF25BLA | Discontinued — replace with AMF 25 below |
| InteliLite NT AMF25 | IL-NT AMF25 / IL-NT AMF25 LT | Discontinued — replace with AMF 25 below |
| InteliLite4 AMF 25 | IL4AMF25BAA / IL4AMF25BLA | Current generation — this product |
Not sure which ComAp controller you need?
Send us the order code stamped on your existing panel, or your generator’s make, model and kW rating, and we’ll confirm the correct match — including whether you need the standard or low-temperature variant — before you order.
Send Details for ID