Generator Control Modules, AMF & Synchronising Panels
- DSE7320 / DSE7320 MKII / 064-43445 DSE7420 MKII DSE7430 MKII DSE6010 DSE8610 MKII
- Module Type Auto Mains Failure (AMF), single gen-set,Auto Mains Failure (AMF), single gen-set, network-enabled,Auto Start without sensing,Synchronising & Load Sharing
- Brand:Deep Sea Electronics
- Warranty : Offered by Manufacturer Not sure which control module you need? Send us the part number stamped on your existing panel, or your generator's make, model and kW rating, and we'll confirm the correct match before you order.
DSE7320 Auto Mains Failure Control Module
DSE7320Deep Sea Electronics · Genuine / MKII Auto Mains (Utility) Failure control module for single diesel or gas gen-set applications, built for sites that need full engine monitoring plus mains supply sensing in one panel.
- 4-line back-lit LCD display with five-key menu navigation and front-panel PIN-protected editing
- 9 configurable inputs and 8 configurable outputs, plus 3 configurable maintenance alarms
- Compatible with electronic CAN engines and non-electronic magnetic pick-up / alternator sensing
- USB, RS232 and RS485 ports plus DSENet® terminals for system expansion and remote SCADA
- Fuel usage monitoring, charge alternator failure alarm, and a 250-event configurable log
- Fully configurable via DSE Configuration Suite PC software
Typical Applications
- Standby and prime-power diesel or gas gensets requiring mains-failure auto-changeover
- Hospitals, telecom sites and commercial buildings needing SMS/modem fault alerting
- Retrofit replacement for older 4-line DSE AMF panels (7320/7310 family) reaching end of life
Sites needing remote PC monitoring without a full synchronising/paralleling requirement
DSE7420 MKII Auto Mains Failure Control Module
DSE7420 MKII Deep Sea Electronics · Genuine / MKII Network-ready Auto Mains Failure module built on the DSE7320’s monitoring core, adding Ethernet, SNMP and dual mutual standby for sites that need to sit on an IT or SCADA network, not just a local panel.
- USB, RS232, RS485and Ethernetports plus DSENet® terminals for system expansion
- Built-in SNMP functionality for direct connection to network monitoring systems
- Dual mutual standby support over RS232 or RS485, for two gensets backing up one critical load
- Enhanced event and performance monitoring with remote communications and PLC functionality
- Wide DC supply tolerance, 8V–35V continuous, survives cranking voltage dips without extra batteries
- Compatible with both 12V and 24V genset systems; excitation/charge-fail monitoring to 35V
Typical Applications
- Data centres and IT facilities that need the genset panel visible on the network via SNMP
- Dual mutual standby installations, where either of two gensets can back up the same critical load
- Multi-site fleets where head office wants Ethernet-based remote monitoring, not just modem/SMS
Upgrades from the DSE7320 where the added Ethernet/SNMP layer is the deciding factor
DSE6010 Auto Start Control Module
DSE6010Deep Sea Electronics · Genuine Compact Auto Start control module for single gen-set applications where mains sensing isn’t required — a straightforward, budget-friendly module for engine monitoring, protection and automatic start/stop.
- Back-lit LCD display showing engine status at all times
- Monitors speed, frequency, voltage, current, oil pressure, coolant temperature and fuel level
- 7 inputs and 6 outputs; 4 configurable outputs on the magnetic pick-up version, 6 on CANbus
- Designed to work with both electronic and non-electronic engines
- Displays warning and shutdown status clearly, reducing diagnosis time on site
Typical Applications
- Standby gensets that only need automatic start/stop, not mains-failure changeover
- OEM panel builders and rental fleet operators needing a compact, cost-effective control module
- Budget retrofits replacing failed basic auto-start panels on single gen-set installations
- Sites planning to add mains sensing later via the DSE6020 without changing the panel footprint
DSE8610 MKII Synchronising & Load Sharing Module
DSE8610 MKIIDeep Sea Electronics · Genuine Deep Sea’s most advanced load-sharing and synchronising control module, built to handle complex grid-parallel generator applications where multiple sets need to run together or alongside the mains.
- Start, stop and synchronise the generator, with manual or automatic load transfer
- Peak lopping/sharing, sequential set start, and automatic hours-run balancing across a fleet
- Mains (utility) decoupling with dedicated decoupling test mode, plus dead-bus sensing and synchronising
- Direct governor and AVR control with fully isolated 0–10V DC gain/offset control loops
- R.O.C.O.F. and vector shift protection for grid-parallel compliance
- Generator/bus voltage range 15–415V AC (ph-N) and 25–719V AC (ph-ph), frequency 3.5–75Hz
Typical Applications
- Multi-genset paralleling plants where sets share load isochronously or in droop mode
- Peak lopping / peak shaving installations running gensets alongside the mains supply
- Mains-parallel (grid-tie) power plants requiring dead-bus synchronising and decoupling protection
- Mission-critical facilities (hospitals, data centres) with N+1 paralleled gensets for redundancy
- Marine and offshore power management panels needing direct governor and AVR control
Additional information
| Brand Identity | Deep Sea Electrical |
|---|---|
| Country Of Origin | European Community |
| Equipment Brand | Cummins, Kohler SDMO, Perkins |
| Equipment Type | Generator |
| OEM | Deep Sea Electrical |
